Multi-color Printing – The most reliable multi-color system
Full-auto Calibration – You don’t have to do ANY manual tuning
Large Print Volume – Print a helmet in 1-piece
1-click to Print – As easy as your copier
Reliable High Speed – Finish your project on time, everytime
Active Flow Control – Smooth surfaces, sharp edges
Print Like A PRO From Your Very First Use
Absolutely Hassle-free
A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
AMS Multi-color Printing
The Most Reliable Multi-color System
The AMS lite has been recognized as the most reliable multi-color 3D printing solution. It also features RFID-sync to automatically match the best print settings for your Bambu filaments, delivering perfect print quality without manual tuning of the filament profile.
High-speed Precision
The High-speed You Can Truly Rely On
A1 is equipped with low-drag linear rails, a powerful MCU, accelerometers, a nozzle pressure sensor, and an advanced motion control system that maximizes their potential. Its high-speed performance is built on a solid foundation, ensuring consistent reliability with stable and uniform output for every print.
Intelligent Print Monitoring
Put Your Printing On Autopilot
3D printing is a complex task where many things can go wrong. The A1 is equipped with a comprehensive print status monitoring system to help keep the print job in check.
Full-size Print Volume
Generous Space for You to Expand Your Fantasy
A1 features 256mm*256mm*256mm build volume, bigger than most of the entry-level printers. Print a helmet in one go, we got you.
Connected with Privacy in Mind
Start & Control on Whatever Device You Prefer
Not only can you connect your A1 to any device you prefer through Bambu Cloud Service, but you can also do so through LAN-only mode. We offer fully customizable connection options to match your privacy preferences.
A1 SPECS
| Item | A1 Specification | |
| Body | Build Volume(W*D*H) | 256*256*256 mm³ |
| Toolhead | Hot End | All-Metal |
| Nozzle | Stainless Steel | |
| Max Hot End Temperature | 300 °C | |
| Nozzle Diameter | 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm |
|
| Heatbed | Build Plate | Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate Bambu Dual-Texture PEI Plate Bambu High Temperature Plate (Smooth PEI) Bambu Cool Plate |
| Max Build Plate Temperature | 100°C | |
| Speed | Max Speed of Tool Head | 500mm/s |
| Max Acceleration of Tool Head | 10000mm/s² | |
| Supported Filament | PLA, PETG, TPU, PVA | Ideal |
| ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Not Recommended | |
| Sensors | Chamber Monitoring Camera | Low Frame Rate Camera (Up to 1080P) Timelapse Supported |
| Filament Run Out Sensor | Yes | |
| Filament Odometry | Yes | |
| Power Loss Recover | Yes | |
| Filament Tangle Sensor | Yes | |
| Physical Dimensions | A1 : 385*410*430 mm³ , Package size : 596*536*325 mm³ , Net weight 8.3 kg , Gross weight 13 kg A1 Combo : Package size 560*540*430 mm³ , Gross weight (AMS lite included) 13.5 kg |
|
Unboxing Video Highlights
This short video guides you through a quick unboxing experience.
*Compliant with the requirements of GB/T 70.1-2008 standard [Equivalent standards: ISO 4762, ASME/ANSI B 18.3.1M – 1986 (R1993), DIN EN ISO 12474]
What’s in the box
Bambu Lab A1
Purge Wiper
Spool Holder
Stainless Steel Nozzle（pre-installed）
PTFE Tube*1
Bambu Filament Samples-20g(Random Color)
Build Plate
Accessory Box
A1 Combo Add-ons
AMS lite Body
AMS lite Stand
AMS lite Rotary Spool Holder (x4)
PTFE Tubes
Explore More About A1
Shawn Martin –
Good printer overall, though I wish the build volume was a bit bigger.
Jason Perkins –
Absolutely love this printer! Prints are clean and precise every time.
Victoria Conley –
The A1 has become my daily workhorse. Couldn’t be happier.
Anna Trujillo –
Decent results, but setup took longer than expected.
Linda Hoover –
Amazing printer for beginners and pros alike!
Richard Moore –
It works okay, but sometimes the prints don’t stick well to the bed.
David Velasquez –
It works okay, but sometimes the prints don’t stick well to the bed.
Richard Smith –
The A1 has become my daily workhorse. Couldn’t be happier.
Shawn Smith –
Setup was easy, and the results are incredible for the price.
Stacy Contreras –
Amazing printer for beginners and pros alike!
Deborah Tyler –
Good printer overall, though I wish the build volume was a bit bigger.
Ashley Mccormick –
Quiet, reliable, and produces great quality prints!
Willie Garcia –
Good printer overall, though I wish the build volume was a bit bigger.
Chris Jarvis –
Setup was easy, and the results are incredible for the price.
Annette Cruz –
Amazing printer for beginners and pros alike!
Angela Middleton –
Setup was easy, and the results are incredible for the price.
Jennifer Christensen –
Absolutely love this printer! Prints are clean and precise every time.
Debra Chambers –
The A1 has become my daily workhorse. Couldn’t be happier.
Ashley Norris –
Amazing printer for beginners and pros alike!
Carla Monroe –
The A1 has become my daily workhorse. Couldn’t be happier.
Philip Herrera –
Setup was easy, and the results are incredible for the price.
Timothy Robles –
Print quality is fine, though it needs more calibration than I thought.
Angela Heath –
The A1 has become my daily workhorse. Couldn’t be happier.
Michael Burch –
Good printer overall, though I wish the build volume was a bit bigger.
Anne Stephens –
Absolutely love this printer! Prints are clean and precise every time.
Jack Deleon –
Good printer overall, though I wish the build volume was a bit bigger.
Katie Rose –
Quiet, reliable, and produces great quality prints!
Tammy Olson –
Amazing printer for beginners and pros alike!
Daniel Rivera –
Setup was easy, and the results are incredible for the price.
Erica Jacobs –
Amazing printer for beginners and pros alike!
Cynthia Smith –
The A1 has become my daily workhorse. Couldn’t be happier.
Brenda Hamilton –
The A1 has become my daily workhorse. Couldn’t be happier.
Joseph Williams –
Not bad for the price, just wish support was faster.
Michael Mccann –
Good printer overall, though I wish the build volume was a bit bigger.
Lauren Jackson –
Setup was easy, and the results are incredible for the price.
Gregory Hill –
Solid performance, only a few small calibration issues at first.
Dr. Shelby Chapman –
Prints great once tuned. Support was helpful too.
Dr. Tamara Johnston –
Solid performance, only a few small calibration issues at first.
Stephanie Mendez –
Print quality is fine, though it needs more calibration than I thought.
Peter Jenkins –
Nice value for the features, but the noise could be lower.
John Guerrero –
Amazing printer for beginners and pros alike!
Tina Watkins –
Absolutely love this printer! Prints are clean and precise every time.
Rachel Warren –
Quiet, reliable, and produces great quality prints!
Alexis Miller –
Good printer overall, though I wish the build volume was a bit bigger.
Amanda Murphy –
Amazing printer for beginners and pros alike!
Kimberly Santos –
Had some issues with filament feeding, but fixed it eventually.
Amanda Sexton –
The A1 has become my daily workhorse. Couldn’t be happier.
Deborah Hall –
The A1 has become my daily workhorse. Couldn’t be happier.
Kimberly Bates –
The A1 has become my daily workhorse. Couldn’t be happier.
Kelly Dawson –
Setup was easy, and the results are incredible for the price.
Kelli Rogers –
Not bad for the price, just wish support was faster.
Ricardo Callahan –
Had some issues with filament feeding, but fixed it eventually.
Michelle Mack –
Amazing printer for beginners and pros alike!
Danielle Griffith –
Absolutely love this printer! Prints are clean and precise every time.
April Moreno –
The A1 has become my daily workhorse. Couldn’t be happier.
Cristian Davis –
Not bad for the price, just wish support was faster.
Jasmine Briggs –
Solid performance, only a few small calibration issues at first.
Mike Roberts –
Quiet, reliable, and produces great quality prints!
Susan Brown –
Solid performance, only a few small calibration issues at first.
Shawn Wise –
The A1 has become my daily workhorse. Couldn’t be happier.
John Hawkins –
Nice value for the features, but the noise could be lower.
Robert Graham –
Good printer overall, though I wish the build volume was a bit bigger.
Madison Peterson –
The A1 has become my daily workhorse. Couldn’t be happier.
Courtney Martin –
Print quality is fine, though it needs more calibration than I thought.
Mr. Darrell Lawrence –
Absolutely love this printer! Prints are clean and precise every time.
Laura Riley –
Print quality is fine, though it needs more calibration than I thought.
Angela Wiley –
Absolutely love this printer! Prints are clean and precise every time.
Crystal Stanley –
Amazing printer for beginners and pros alike!
Connor White –
Absolutely love this printer! Prints are clean and precise every time.
Jason Allen –
Absolutely love this printer! Prints are clean and precise every time.
April Hammond –
Quiet, reliable, and produces great quality prints!
Sarah Perez –
Setup was easy, and the results are incredible for the price.
Gary Perez –
Absolutely love this printer! Prints are clean and precise every time.
Jennifer Macias –
Very happy with the quality. Could use better documentation.
Christine Ballard –
Nice value for the features, but the noise could be lower.
Laura Dean –
Setup was easy, and the results are incredible for the price.
Lindsey Arellano –
Absolutely love this printer! Prints are clean and precise every time.
Jason Brown –
Solid performance, only a few small calibration issues at first.
Tracey Russell –
Absolutely love this printer! Prints are clean and precise every time.
Sharon Hopkins –
The A1 has become my daily workhorse. Couldn’t be happier.
Joshua Lawrence –
Absolutely love this printer! Prints are clean and precise every time.
Vincent Chase –
The A1 has become my daily workhorse. Couldn’t be happier.
Rebecca Herrera –
Prints great once tuned. Support was helpful too.
Marvin Kennedy –
Absolutely love this printer! Prints are clean and precise every time.
Rachel Bryant –
Absolutely love this printer! Prints are clean and precise every time.
Stephanie Knight –
Solid performance, only a few small calibration issues at first.
Mrs. Julie Thompson DDS –
Amazing printer for beginners and pros alike!
Tyler Barnes –
Quiet, reliable, and produces great quality prints!
Sherry Bell –
Nice value for the features, but the noise could be lower.
Jon Wilkins –
Very happy with the quality. Could use better documentation.
Bradley Blackwell –
Setup was easy, and the results are incredible for the price.
Tony Pratt –
Setup was easy, and the results are incredible for the price.
Amy Perry –
Good printer overall, though I wish the build volume was a bit bigger.